LiveZilla Live Chat Software

All our prices include VAT at 20%.
Tile Supply Ltd are one of the leading online tile suppliers in the UK since 2009
Delivery From As Little As £7.99 Per Order
Delivery Is Free On Orders Over £150*

 


 

Ultra Tile 1 Part Levelling Compound 25kg Bag

Ultra Tile 1 Part Levelling Compound 25kg Bag
R.R.P: £40.08
Brand:Ultra Tile
Product Code: LEVIT1HDB25KG
Reward Points: 25
Availability: In Stock
Price: £31.19
Ex Vat: £25.99
Price in reward points: 2599

Make an offer

If you like the product you see but it's a little out of your
budget then you can make us and offer below.
Alternatively feel free to call on 01626 776606 for a custom quote.

 

* Denotes a required field









Make an offer
Qty:  Add to Cart
   - OR -   
Sold By The:Unit

Technical Data
Packaging: 25kg Bag
Working Time: 20-30 Minutes @ 20°C
Time to Foot Traffic: 2-3 Hours @ 20°C
Time to Cover:     1 Day, 3-15mm
                               2 Days up to 30mm
                               3 Days up to 50mm

Application Thickness: 3-50mm
Protein Free: Yes
Coverage @ 3mm: 5.0m²
Consumption/mm Thickness: 1.69kg/mm/m²
Suitable for Pump Application: Yes

Compressive Strength: 28 Days: 38.0 N/mm2
(to BS EN 13892-2) 7 Days: 27.50 N/mm2
                                    1 Day: 19.50 N/mm2

Flexural Strength: 28 Days: 8.50 N/mm2
(to BS EN 13892-2) 7 Days: 4.50 N/mm2
                                    1 Day: 2.70 N/mm2

Storage: Store in a dry place at temperatures
between 5°C and 30°C. If stored correctly
and used within 6 months of the date
shown on the bag, the activity of the
reducing agent will be maintained and
this product will contain, when mixed with
water, no more than 0.0002% (2 ppm)
soluble Chromium (Vl) of the total dry
weight of the cement. Shelf life in correctly
sealed bags is 6 months. Note: the use of
this product after the end of the declared
storage period may increase the risk of an
allergic reaction.

Shelf Life: 6 months in above conditions.

INFORMATION
Ultra Floor Level IT one HDB is a single part concrete floor leveller containing a
compound of specially graded fillers, fine cements and polymers for smoothing
and levelling internal floors with irregular substrates, prior to the application
of decorative surface flooring. Ultra Floor Level IT one HDB has a set time of
approximately 3 hours and can be laid at depths from 3mm to 50mm. It is suitable
for use on all common building substrates including concrete, sand/cement
screeds, flooring grade asphalt, floors with under floor heating, and can be used
over screwed and fixed boarded floors at 300mm centres.

Surface Preparation
Before application the surface being adhered to must be clean, firm, dry, free of
dust, dirt, oil and grease or any other contaminating barriers. Remove any flaking
or peeling layers. The substrate must be strong enough to support the weight of
the leveller, adhesive and covering being fixed. Direct to earth sub-floors must have
an effective damp proof membrane. All existing damp proof membranes must be
functioning effectively.
Tools
• Suitable steel trowel
• Spiked roller
• Electric drill and paddle

Priming
Porous and timber surfaces should be primed using Ultra Floor Prime IT AR or Ultra
Tile Prime IT FP. This will help to prevent water penetration, increase bond strength
and reduce the possibility of failure. Ultra Floor Prime IT AR or Ultra Tile Prime IT FP
should be diluted 1 part primer to 3 parts water and applied with a roller, brush or
spray. Allow the liquid to become translucent and nearly dry before applying Ultra
Floor Level IT one HDB. Very porous substrates may require an initial coat diluted 5
parts water to 1 part primer before applying the above.

Mixing
Ultra Floor Level IT one HDB powder should be added to 4.25 litres of clean water
in a suitable container and slowly mixed for approximately 3-5 minutes with a slow
speed drill and paddle until an homogeneous mixture is obtained. Once mixed the
material is immediately ready for use and has a workability time of approximately
20-30 minutes. We would strongly recommend that you do not mix more material
than can be used in this time and do not re-wet.

Application (By Hand)
The mixed material should be poured directly onto the prepared substrate and
lightly trowelled to the required thickness with a solid bed trowel to achieve a
smooth surface texture. We also recommend the use of a spiked roller.

Application (By Pump)
For pump application contact Instarmac Group Technical Department for a list of
contractors.

Cleaning
Tools should be thoroughly cleaned in water to remove excess materials
immediately after use.

Related products
• Ultra Floor Prime IT AR – Acrylic primer
• Ultra Floor Prime IT N – Polymer emulsion primer
• Ultra Tile Prime IT FP – Flexible additive and primer

If you require any further information or technical advice on this product, please feel free to call Tile Supply Ltd on 01626 776606 and our technical team will be more than happy to assist.

Product Specification
Tiles Per Box0
Tiles Per SQM0
P.E.IN/A
Sold PerUnit
Tile InfoLevelling Compound

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating:Bad            Good

Enter the code in the box below:



Tags:ACC00927,

 
 © Copyright Tile Supply Ltd (Reg.No.6872665 - VAT No.111 0409 84) 2009 - 2014 All rights reserved