Ultra Tile Fine Joint Grout Cream 3kg Bag

TECHNICAL DATA
Packaging: Triple walled paper bags.
Standard Conformity: Conforms to the requirements of EN13888 Class: CG2.
Drying Time: 10-15 minutes dependent on temperature.
Pot Life: 45 minutes dependent on temperature.
Set Time: 24 hours.
Application Thickness: 1-12mm.
Protein Free: Yes.
Colours: White, grey, cream, limestone and
anthracite.
Sizes: 3kg, 7.5kg, 15kg.

Storage: Store in unopened original bags at
conditions between 5°C and 25°C. Avoid
frost. This product must be stored clear of
the ground in cool, dry conditions and
protected from excessive drafts. If stored
correctly and used within 6 months of the
date shown on the bag, the activity of the
reducing agent will be maintained and this
product will contain, when mixed with water,
no more than 0.0002% (2ppm) soluble
Chromium (IV) of the total dry weight of the
cement. Note: The use of this product after
the end of the declared storage period may
increase the risk of an allergic reaction.

Shelf Life in Unopened Bags: 6 months in cool, dry conditions above 5°C
and below 25°C.

INFORMATION
Ultra Fine Joint Grout has been specially formulated for tiles with joint widths up
to 12mm. With excellent joint filling properties, the product allows for joints to
be grouted in one application. Ultra Fine Joint Grout is ideal internally and
externally in both wet and dry conditions, including swimming pools. The
product is suitable for use with most common tile applications including natural
stone, porcelain, conglomerate and ceramic wall and floor tiles.


PRECAUTION
Certain tiles may suffer from discoloration or scratching when using grouts. We
would recommend that a test application be carried out prior to grouting.

SURFACE PREPARATION
Ensure that the adhesive is completely set and that the tiles are firmly fixed.
Ensure that joints are free from excess adhesive, dust, grease or any other
contaminates.

MIXING
Ultra Fine Joint Grout powder should be added slowly to clean water in a
suitable container in the approximate proportion of 3.5 parts powder to 1 part
water. Mix until a smooth consistency is achieved. Do not mix more than can be
used in a 45-60 minute period, do not re-wet or add too much water. This will
cause a weakening of the grout and a tendency to crumble. In certain cases this
may also lead to discoloration in the form of efflorescence. Mixing ratio: 1kg of
product to 0.37 litres of water.

APPLICATION
Ultra Fine Joint Grout should be applied to the surface using a rubber backed
trowel or squeegee. Work the mixed material thoroughly into the joints, a
small area at a time. Ensure that the joints are completely filled without voids
before continuing. Excess grout should be removed as grouting proceeds. Any
residue left on the face of the tile can be removed by wiping with a damp
sponge when the grout has started to dry (approximately 10-15 min). Any dry
film remaining once the job is complete can be polished off the face of the tiles
with a soft dry cloth.

RELATED PRODUCTS
• Ultra Grouts – Ultra Wide Joint Grout, Ultra Flex Joint Grout
• Ultra Ready Mixed Tile Adhesives – Ultra ProStick BS, Ultra ProGrip HG, Ultra
WaterProof WR, Ultra WaterProof WR Flex
• Ultra Powder Adhesives – Ultra ProSet SS, Ultra ProRapid PB, Ultra ProSet
RS, Ultra ProFlex SP, Ultra ProFlex SP+ES, Ultra Flex 2P

Product Specification
Tiles Per Box	0
Tiles Per SQM	0
P.E.I	N/A
Sold Per	Unit
Tile Info	Wall and Floor Grout

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: