LiveZilla Live Chat Software

All our prices include VAT at 20%.
Tile Supply Ltd are one of the leading online tile suppliers in the UK since 2009
Delivery From As Little As £7.99 Per Order
Delivery Is Free On Orders Over £150*

 


 

Ultra Tile Pro Flexible Slowset Powder Grey 20KG Bag

Ultra Tile Pro Flexible Slowset Powder Grey 20KG Bag
R.R.P: £35.28
Brand:Ultra Tile
Product Code: SPES20G
Reward Points: 26
Availability: In Stock
Price: £31.98
Ex Vat: £26.65
Price in reward points: 2665

Make an offer

If you like the product you see but it's a little out of your
budget then you can make us and offer below.
Alternatively feel free to call on 01626 776606 for a custom quote.

 

* Denotes a required field









Make an offer
Qty:  Add to Cart
   - OR -   
Sold By The:Unit

TECHNICAL DATA
Packaging: 20kg – triple walled paper bags.
Standard Conformity: Conforms to the requirements of EN12004
Class: C2E S1.
Bed Thickness & Coverage: At 3mm bed thickness you will require
4.5kg material per m2 (6mm = 9kg
material per m2).
Open Time: 1 hour depending upon temperature and
substrate.
Set Time: 16 hours depending on temperature and
substrate.
Storage: This product must be stored in unopened
bags, clear of the ground in cool dry
conditions and protected from excessive
drafts. If stored correctly and used within
6 months of the date shown on the bag,
the activity of the reducing agent will be
maintained and this product will contain,
no more than 0.0002% (2ppm) soluble
Chromium (VI) of the total dry weight of
the cement.

Shelf Life: 6 months in above conditions; extreme
temperatures and high humidity will further
reduce shelf life.

Colour: White and Grey.
Note: All tiling should follow the correct
British/European standard, and incorporate
movement joints as specified therein.

INFORMATION
Ultra ProFlex SP+ES is a single part, extended set, flexible, polymer modified floor
and wall tile adhesive. Specially formulated with extended workability for large
format and intricate porcelain, ceramic and natural stone tile work, with
exceptional adhesion and flexural capacity, it is ideal for situations where vibration
may occur. The adhesive’s unique qualities make it ideal for fixing tiles to most
common building substrates including concrete/sand render, screeds, brick and
block work, heated sub-floors, existing tiled surfaces and overboarded wooden
floors. (For substrates with greater movement or vibration refer to Ultra Flex 2P).
Ultra ProFlex SP+ES is perfect for both interior, exterior, wet and dry conditions,
such as conservatories, showers, saunas and swimming pools.
It will take light foot traffic 16 hours after application, dependent upon
temperature and substrate.

SURFACE PREPARATION
The tiling surface must be clean, firm, dry, free of dust, dirt, oil and grease, or any
other contaminates, and must be strong enough to support the weight of the tiles and
adhesive. It is advisable when applying adhesive to porous surfaces that the area be
primed with Ultra Flexi-Prime as this will help to prevent water penetration, increase
bond strength and reduce the possibility of adhesive failure.

MIXING
Ultra ProFlex SP+ES should be added slowly to clean water. Mix thoroughly to
give a slump free easily worked adhesive. The mix proportions by volume are
2.5 parts powder to 1 part water. A 20kg bag of Ultra ProFlex SP+ES will
require approximately 5 litres water (White), or 4.4 litres water (Grey). Once fully
mixed, it is immediately ready for use and has a working time of approximately
1 hour at 20ºC. We strongly advise that you do not mix more than can be used
in this time. Do not re-wet the adhesive.

APPLICATION
Apply the adhesive to a thickness of 3mm-20mm up to 1m2 in one pass. On interior
walls use a notched trowel leaving solid ribs, i.e. 3mm x 3mm at 6mm centres for
mosaics, 5mm x 5mm at 10mm centres for wall tiles, and 8mm x 8mm at 16mm
centres for floor tiles. On floors and external areas, use the solid bed trowel method.
Large studded tiles may also need to be ‘buttered’ with adhesive. Bed the tiles in
with a slight twisting action. Leave spaces between the tiles for grouting
(approximately 1mm-3mm for walls and 2mm-20mm for floors). Clean off excess
adhesive from the tile face and grout lines with a damp cloth before it sets.

CLEANING
Tools should be thoroughly cleaned in water to remove excess materials
immediately after use.

GROUTING
Temperature and conditions may affect the tile set and therefore the grouting
start time. Check set before grouting – Instarmac’s technical team will be happy
to suggest the best Ultra grout for ultimate performance.

FEATURES & BENEFITS
Ultra ProFlex SP+ES single part, extended set, high strength, wall and floor tile
adhesive. Suitable for heavily trafficked areas. Ideal for applications where
movement and vibration is likely, such as overboarded wooden floors.

If you require any further information or technical advice on this product, please feel free to call Tile Supply Ltd on 01626 776606 and our technical team will be more than happy to assist.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating:Bad            Good

Enter the code in the box below:



Tags:ACC00909,

 
 © Copyright Tile Supply Ltd (Reg.No.6872665 - VAT No.111 0409 84) 2009 - 2014 All rights reserved